Snow Performance – Boost Cooler Stage 2 Methanol-Einspritzkit

OPTIMALE KÜHLUNG MIT WASSEREINSPRITZUNG

Erzielen Sie bis zu 10–25 % mehr Leistung in Ihrem Turbo- oder Kompressormotor, selbst wenn er bereits abgestimmt ist, mit dem Boost Cooler™ Wasser/Methanol-Einspritzsystem!

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

Darüber hinaus erzeugt der Boost Cooler – anders als ein Ladeluftkühler – keinen Ansaugwiderstand und senkt im Gegensatz zu Rennkraftstoff die Ansauglufttemperatur um bis zu 60 °C und verbessert gleichzeitig die Ladedichte.

Snow Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler™ can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

MORE POWER BY BOOST COOLER

With the Boost Cooler, you can achieve up to 10% extra power for suction engines. The optimal cooling compensates for power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

FEATURES

• VC-30 Steuergerät, Ladedruck/MAP-geregelt, variable Einspritzung
• Efficient Intercooling, up to 60°C lower air intake temperature
• Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
• Reduces EGT and oil temperatures
• Allows you to run safely more boost and/or more timing
• Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
• Keine Verschleißprobleme, nur saubere Brennräume.
• No loss of boost as with an intercooler
• Reduces the specific fuel consumption
• Easy installation

BOOST COOLER LIEFERUMFANG

• High Pressure Diaphragm Pump 300+ PSI
• 1 x Boost Cooler VC-30 Controller, ladedruckreferenziert
• 2 x Nozzle
• 1 x 3-l-Boost-Cooler-Wasserinjektionsbehälter
• 1 x Low level indicator (includes LED and an EZ installation gommet)
• 1 x Pressure tubing 1/4" (3 metre)
• 1 x 1/4" Düsenhalter, 90° Aluminium
• 1 x Installation material
• 1 x Einbauanleitung