Snow Performance - Kit de Injeção de Metanol Boost Cooler Stage 2

ARREFECIMENTO OTIMIZADO COM INJEÇÃO DE ÁGUA

Obtenha até 10–25% mais potência no seu motor turbo ou supercharged, mesmo que já esteja remapeado, utilizando o Sistema de Injeção de Água/Metanol Boost Cooler™!

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

Além disso, o Boost Cooler não cria restrição na admissão como um intercooler e, ao contrário da gasolina de competição, reduz a temperatura do ar de admissão em até 60°C e também melhora a densidade do ar de carga.

Snow Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler™ can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

MORE POWER BY BOOST COOLER

With the Boost Cooler, you can achieve up to 10% extra power for suction engines. The optimal cooling compensates for power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

FEATURES

• Unidade de controle VC-30, controlada por Boost/MAP, injeção variável
• Efficient Intercooling, up to 60°C lower air intake temperature
• Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
• Reduces EGT and oil temperatures
• Allows you to run safely more boost and/or more timing
• Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
• Sem problemas de desgaste, apenas câmaras de combustão limpas.
• No loss of boost as with an intercooler
• Reduces the specific fuel consumption
• Easy installation

ESCOPO DE FORNECIMENTO DO BOOST COOLER

• High Pressure Diaphragm Pump 300+ PSI
• 1 x Controlador Boost Cooler VC-30, referenciado à pressão de sobrealimentação
• 2 x Nozzle
• 1 x Reservatório Boost Cooler de 3 l para injeção de água
• 1 x Low level indicator (includes LED and an EZ installation gommet)
• 1 x Pressure tubing 1/4" (3 metre)
• 1 x suporte de bico 1/4", liga em ângulo de 90°
• 1 x Installation material
• 1 x Manual de instalação