Snow Performance - Kit iniezione metanolo Boost Cooler Stage 2

RAFFREDDAMENTO OTTIMALE CON INIEZIONE ACQUA

Ottieni fino al 10-25% di potenza in più sul tuo motore turbo o compressato, anche se è già mappato, utilizzando il sistema di iniezione acqua/metanolo Boost Cooler™!

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

Inoltre, il Boost Cooler non crea restrizioni all’aspirazione come un intercooler e, a differenza della benzina da competizione, riduce la temperatura dell’aria in aspirazione fino a 60°C migliorando anche la densità dell’aria di sovralimentazione.

Snow Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler™ can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

MORE POWER BY BOOST COOLER

With the Boost Cooler, you can achieve up to 10% extra power for suction engines. The optimal cooling compensates for power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

FEATURES

• Centralina VC-30, controllo Boost/MAP, iniezione variabile
• Efficient Intercooling, up to 60°C lower air intake temperature
• Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
• Reduces EGT and oil temperatures
• Allows you to run safely more boost and/or more timing
• Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
• Nessun problema di usura, solo camere di combustione pulite.
• No loss of boost as with an intercooler
• Reduces the specific fuel consumption
• Easy installation

AMBITO DI FORNITURA BOOST COOLER

• High Pressure Diaphragm Pump 300+ PSI
• 1 x controller Boost Cooler VC-30, riferito alla pressione di sovralimentazione
• 2 x Nozzle
• 1 x serbatoio acqua iniezione Boost Cooler da 3 l
• 1 x Low level indicator (includes LED and an EZ installation gommet)
• 1 x Pressure tubing 1/4" (3 metre)
• 1 x portaugello 1/4", lega a 90°
• 1 x Installation material
• 1 x Istruzioni di montaggio