Snow Performance - Kit d’injection de méthanol Boost Cooler Stage 2

REFROIDISSEMENT OPTIMAL AVEC INJECTION D’EAU

Obtenez jusqu’à 10 à 25 % de puissance en plus sur votre moteur turbo ou compressé, même s’il est déjà reprogrammé, grâce au système d’injection eau/méthanol Boost Cooler™ !

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

De plus, le Boost Cooler ne crée pas de restriction à l’admission comme un intercooler et, contrairement au carburant de compétition, il réduit la température d’air d’admission jusqu’à 60 °C tout en améliorant la densité de l’air de suralimentation.

Snow Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler™ can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

MORE POWER BY BOOST COOLER

With the Boost Cooler, you can achieve up to 10% extra power for suction engines. The optimal cooling compensates for power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

FEATURES

• Unité de commande VC-30, pilotée par suralimentation/MAP, injection variable
• Efficient Intercooling, up to 60°C lower air intake temperature
• Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
• Reduces EGT and oil temperatures
• Allows you to run safely more boost and/or more timing
• Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
• Aucun problème d’usure, seulement des chambres de combustion propres.
• No loss of boost as with an intercooler
• Reduces the specific fuel consumption
• Easy installation

CONTENU DE LIVRAISON DU BOOST COOLER

• High Pressure Diaphragm Pump 300+ PSI
• 1 x contrôleur Boost Cooler VC-30, asservi à la pression de suralimentation
• 2 x Nozzle
• 1 x réservoir d’injection d’eau Boost Cooler 3 l
• 1 x Low level indicator (includes LED and an EZ installation gommet)
• 1 x Pressure tubing 1/4" (3 metre)
• 1 x Porte-buse 1/4" à 90°, alliage
• 1 x Installation material
• 1 x Notice de montage